Homeowners will often have fairly large sections of their property paved with concrete. Whether this is to create a patio or driveway, it will be wise to have an appreciation for the ways that you can maintain this valuable and useful part of your property.
Keep A Repair Kit Available
There will be many times when you find that a section of the concrete has been damaged due to chipping or cracking. When these issues form, you should take steps to seal and reinforce the concrete. Without this basic step, the damage will start to spread throughout the concrete. For this reason, keeping a concrete repair kit available will enable you to quickly respond to these damages when they arise. Prior to using the resin or concrete patch, you must thoroughly rinse out the chip or crack to remove dust and other debris that might interfere with the ability of the repair material to adhere to the concrete.
Clean The Concrete Every Few Months
Surface dirt and grime can have a degrading effect on the concrete. When these materials are not removed, they can result in deep and permanent stains to the concrete. Depending on the types of substances that are on it, the concrete may also experience structural damage. This is true when the materials are extremely harsh, such as motor vehicle fluids or animal waste. Due to the large surface area of your pavement, you might assume that cleaning it will be extremely difficult for you to do. Yet, pressure washers are able to quickly and effectively remove these materials from the pavement. Using one of these devices will allow you to completely clean your pavement within a couple of hours.
Know The Dangers Of Chemical Deicing Agents
Deicing agents are commonly applied to stop paved surfaces from developing potentially hazardous patches of slippery ice. However, these materials are highly damaging to concrete due to the ability of these substances to cause the surface of the pavement to become brittle. If you find using these chemicals to be unavoidable, you will want to thoroughly rinse off the deicing agent after the temperatures return to being above freezing. This will minimize the amount of time that the deicing agent is in contact with the concrete, which will mitigate the damage that it can cause. Sand can be an effective alternative to these substances, but it may be slightly more difficult to clean up after the temperatures warm up again.